Địa chỉ mới : 255/14A tổ 61, KP 5, đường Phan Văn Hớn, Phường Tân Thới Nhất, Quận 12, Tp. HCM
trang chủ Sản phẩm DELTA Biến tần (VFD series)
Biến tần VFD-CT2000 series

The Delta Inverter CT2000 Series is an industrial drive designed for textile and other harsh environment applications that have a high density of dust, fiber, oil or other such substances. To prevent fiber or dust from clogging or entering the drive, the Delta Inverter CT2000 offers a fanless design for flange mount installation which is suitable for an application environment that has an air cooling duct system.

There is also a large fan design for wall mount installation that can fit all types of applications. The Delta Inverter CT2000 provides ultimate application flexibility for the textile industry.



■ Fanless design with high efficiency heat sink to prevent fiber and dust from clogging or entering the drive. No more overheating problems (*1)
■ Flange mount installation to enhance system safety and stability and provide excellent heat dissipation performance (*1)
■ Supports external fan connection (*1)
■ Wall mount installation model with a large fan (*2)
■ Deceleration Energy Backup (DEb) function for smooth motor deceleration control
■ Supports both asynchronous and synchronous motors
■ Common DC bus design
■ Enhanced drive durability using Printed Circuit Board (PCB) coating standard IEC 60721-3-3 CLASS 3C2
■ Built-in 10 K steps PLC programming capability and RS-485 with MODBUS communication for master station so there is no need for an additional host controller and communication module in the system. Constructs a simple network with high performance and effective cost.
■ Optional communication cards are available upon request

*1: For model names ending with code A or B
*2: For model names ending with code C


Spinning machines, roving machines, machine tool, ceramic, glass and other highly demanding industries.



Environment for Operation, Storage and Transportation

DO NOT expose the AC motor drive to harsh environments, such as with dust, direct sunlight, corrosive/ inflammable gasses, humidity, liquid or vibration. The salt in the air must be less than 0.01mg/cm2 every year.
Environment Installation location IEC60364-1/IEC60664-1 Pollution degree 2, Indoor use only

Storage -25 ºC ~ +70 ºC
Transportation -25 ºC ~ +70 ºC
Only allowed for non-condensation, non-frozen, non-conductive pollution environment.
Rated Humidity Operation Max. 95%
Storage/ Transportation Max. 95%
Only allowed for non-condensation, non-frozen, non-conductive pollution environment.
Air Pressure Operation/
Storage 86 to 106 kPa
Transportation 70 to 106 kPa
Pollution Level IEC60721-3-3
Operation Class 3C2; Class 3S2
Storage Class 1C2; Class 1S2
Transportation Class 2C2; Class 2S2
Only allowed for non-condensation, non-frozen, non-conductive pollution environment.
Altitude Operation If AC motor drive is installed at altitude 0~1000m, follow normal operation restrictions.
If it is installed at altitude 1000~3000m, decrease 1% of rated current or lower 0.5 ºC
of temperature for every 100m increase in altitude. Maximum altitude for Corner
Grounded is 2000m.
Drop Storage ISTA procedure 1A (according to weight) IEC60068-2-31
Vibration 1.0mm, peak to peak value range from 2 Hz to 13.2 Hz; 0.7 G~1.0 G range from 13.2 Hz to 55 Hz; 1.0 G range from 55 Hz to 512 Hz. Comply with IEC 60068-2-6
Impact IEC/EN 60068-2-27
Position Max. allowed offset angle ±10º (under normal installation position)

Sản phẩm liên quan


 255/14A  Phan Văn Hớn, Phường Tân Thới Nhất, Quận 12, Tp.HCM

 Tel:  +84-28-35921267 - Fax: +84-28-35921280

  Email : info@songtuan.com.vn